Loom State
Textile substrate directly removed from the loom prior to chemical scouring or bleaching represents the intermediate production state across mechanical mill operations. Raw greige fabric contains natural non-cellulosic constituents including pectins, waxes, residual sizing chemicals applied during warping, and inherent flax shives. In Chinese linen mills, this unboiled material retains the characteristic grayish-tan coloration of raw scotched flax tow or line flax yarns.
The material boundary ends where chemical preparation or continuous desizing alters the fiber chemistry and removes surface binders.
Offloom Inspection
Standardized grading at the offloom inspection frame evaluates the material against visual defect tolerances prior to wet processing dispatch. Quality inspectors examine greige fabric under calibrated lighting frames according to GB/T standard protocols, logging slubs, missing ends, broken picks, and reed marks onto inspection tally sheets. The recorded structural metrics include verified ends per centimeter and picks per centimeter alongside linear mass per square meter against the agreed purchase specification.
Fabric defect points are aggregated per hundred square meters to determine whether a roll meets first-grade qualification or requires downgrade to substandard stock. Mill specifications often permit minor oil spots and removable warp size residue at this evaluation stage because subsequent scouring cycles dissolve organic sizing agents. Permanent yarn tension faults or warp streaks cannot be corrected in downstream finishing and result in immediate lot deductions.
Commercial Settlement
Financial settlement between weaving facilities and independent commission dye houses relies on certified dry roll weight alongside gross length recorded on shipping documentation. Mill delivery notes accompany greige fabric consignments to establish custody transfer and define acceptable moisture regain thresholds prior to caustic boiling.