Filament Aggregation
Clusters of elementary flax cells held together by lignin and pectin form the primary structural components of the plant stem. These technical fiber bundles run the entire length of the stalk and provide the strength needed for industrial spinning. They are much thicker than individual cotton fibers and require different handling during the initial decortication.
The quality of the retting determines how easily these groups can be refined.
Processing Characteristics
Mechanical refinement in the mill focuses on reducing the diameter of the material without causing excessive breakage. Because technical fiber bundles are composite structures, they must be softened through water or chemical treatments before they can be drawn into fine yarn. The spinning limit of the flax is dictated by the size and flexibility of these units.
In wet spinning, the heat of the water helps to lubricate the bundles so they slide past each other more freely. High temperature baths facilitate the sliding of the filaments within the drafting zone.
Structural Integrity
Final fabric durability depends on the cohesive strength of the internal cellular bonds. If the technical fiber bundles are damaged by over retting, the resulting cloth will have poor abrasion resistance. Maintaining the health of these structures throughout the scutching and hackling stages is the main goal of the fiber preparation department.
Stronger bundles allow for the creation of heavier sailcloth or upholstery fabrics.