Surface Friction
Flexible drafting bands drive the detaching and drawing mechanism during the combing phase of flax preparation. A high-quality comb apron provides the necessary grip to transport the newly combed flax beard from the circular comb to the delivery rollers. Synthetic or leather compositions are chosen based on the operating temperature and the presence of residual processing oils.
Fibre Cohesion
Operating parameters dictate that the comb apron must run under tension without stretching or slipping. When the detaching rollers reverse to piece up the combed fringe, the apron reverses too, showing the need for dimensional stability. This reciprocating motion puts severe stress on the splice joint.
Replacement Schedule
Machine operators monitor the surface condition of the apron to detect cracks, gouges, or accumulation of wax and short fibres. Degradation of the belt surface results in erratic drafting, which shows up as periodic thickness variations in the yarn test results. A scheduled replacement is executed when the friction coefficient drops below the threshold specified in the mill operating manual.
This preventive action maintains the high quality demanded by export weaving contracts. In typical flax wet spinning operations, aprons are checked every eighty operating hours to verify surface integrity and tension settings, ensuring that yarn unevenness remains within the limits set by European buyers.