Linear Variegation
Textile defects include continuous bands running along the lengthwise direction of a woven fabric, caused by differences in yarn characteristics or spacing. This longitudinal anomaly, known as a warp streak, appears as a narrow line of varying color or density.
Loom Causation
Weaving preparation requires thousands of warp yarns to be wound parallel onto the loom beam under uniform tension. If a single yarn has a different twist, count, or fiber blend, it absorbs dye differently from its neighbors, resulting in a visible stripe after finishing. Another common cause of a warp streak is a bent reed wire that displaces several warp yarns, creating a permanent gap or crowding along the fabric length.
These streaks are often subtle in the raw fabric but become highly visible after the bleaching and dyeing stages.
Inspection Grading
Visual inspection registers these vertical lines during the final quality check before packaging. Because a warp streak often runs through the entire length of the roll, it represents a major defect under standard grading rules. In linen fabrics, which are valued for their uniform appearance, such faults often require the fabric to be designated as second quality.
Preventing these streaks requires careful monitoring of yarn supply consistency and regular maintenance of the weaving reeds.