Sorting Technique
Traditional extraction of flax fibers by hand from a raw sample determines the average staple length before spinning begins. This laboratory practice of manual comb sorting allows technicians to pull fibers through a series of progressively finer pins to organize them by length. This step prevents shorter fibers from contaminating the long-line flax sliver, protecting the strength of the final yarn.
Laboratory Procedure
Technicians execute manual comb sorting by mounting a fiber bundle in a fixed comb and drawing the loose ends out with a grip. This action is repeated several times to ensure that all fibers are aligned parallel to one another and that any entangled clusters are gently opened. The operator then uses a second comb to pluck out the shortest fibers, which are set aside and weighed separately.
By weighing the different length groups, the laboratory calculates the exact percentage of long, medium, and short fibers in the bale. This detailed physical division is highly reliable and does not rely on complex electronic calibrations that can drift over time.
Quality Control
Flax spinning mills in regions like Heilongjiang use these results to verify that incoming fiber shipments match the buyer’s acceptance criteria. When the manual comb sorting results indicate a high proportion of short fibers, the mill can adjust its pre-spinning preparation to avoid excess waste during drafting. This baseline measurement keeps yarn quality consistent even when raw fiber batches vary.