Electromechanical Interruption
Mechanical warp stop motions halt high-speed weaving equipment instantly upon detecting yarn tension failure during fabric formation. A drop wire trip occurs when a suspended metal blade falls onto an energized contact bar as an individual warp thread breaks. This physical contact closes an electrical circuit, triggering the loom brake immediately.
Detection Mechanism
Suspended thin steel strips ride directly on each warp end between the harness frames and back rest roller. When tension drops below a threshold established by yarn weight, gravity pulls the strip downward into a slotted electrode bar. Modern weaving sheds record every drop wire trip on electronic loom monitoring terminals to calculate warp break rates per hundred thousand picks.
Supervisors monitor these automated event logs to identify sub-standard yarn lots or uneven sizing distribution across warp beams.
Defect Resolution
Rapid loom shutdown limits structural fabric faults to a single pick line. After a drop wire trip, the weaver ties the broken flax yarn end and draws it through the reed dent. Loom restart logs document the duration of the stoppage, allowing floor managers to isolate whether downtime stems from operator delay or complex warp entanglements.
High frequency trips on pure linen warps force machine recalibration or application of liquid lubricant to reduce friction during shedding.