Fibre Control Force
Longitudinal pull exerted on an advancing fibre strand between consecutive roller nips regulates mass attenuation across drawing and spinning frames. Regulated drafting tension counteracts inter-fibre friction to pull individual flax fibrils past one another without generating sliver breaks or thick clumps. The measurement applies along the drafting zone between back feed rollers and front delivery rollers.
It ceases to exist once the attenuated strand exits the final nip line and enters the twisting zone.
Velocity Gradient Control
Mechanical attenuation requires the front drafting rollers to rotate at a peripheral speed higher than that of the retaining back rollers. Maintaining balanced drafting tension ensures that bast bundles slide under constant restraint, held in place by faller pins, aprons or water surface tension. Excessive tension pulls fibres prematurely from the pinning zone, yielding thin spots and end-breaks that shut down spinning spindles.
Insufficient tension permits fibres to buckle before entering the front nip, causing uncontrolled bunching and heavy slubs in the roving. In wet spinning frames, warm water softens inter-bundle pectin, lowering the required drafting tension compared to dry drawing processes. Adjustments are executed mechanically by swapping change pinions or altering draft ratios across the drafting field.
Yarn Regularity Impact
Mass consistency in finished linen yarn depends on steady resistance during bundle attenuation. Uneven tension produces periodic drafting waves that fail unevenness percentage thresholds on yarn capacitance testing units. Mill spinning dockets record the draft distribution ratio, break draft and delivery speeds across every frame bank.
Yarn lots showing high coefficient of variation values trace their mass defects to unstable drafting tension in early drawing passages.