Measurement Method
Linear density determination for bast fibers requires precise physical separation and weighing under controlled atmospheric conditions. When measuring yarn count or fiber fineness in flax processing, cut-length gravimetric testing offers a reliable standard by establishing a direct ratio between a pre-determined specimen length and its dry mass. This protocol avoids the tension errors common in continuous-spool measurements because each specimen is prepared under static conditions.
The resulting value, expressed in tex or lea, is used to verify the consistency of wet-spun flax yarn.
Laboratory Procedure
Preparation begins with conditioning the linen yarn or roving in a standard atmosphere of sixty-five percent relative humidity and twenty degrees Celsius. Once conditioned, the technician cuts the sample to a precise length, typically using a wrap reel or a dedicated cutting template. Each cut piece is weighed on an analytical balance to determine the mass of the yarn.
This dry-mass value provides the baseline for the spinning mill to calculate the moisture regain and adjust the spinning draft accordingly.
Standard Agreement
Spinning contracts specify the allowed tolerances for linear density before the yarn is shipped to the weaving mill. Buyers use this method to audit yarn shipments and resolve disputes about count variations. A single, accurate test prevents downstream weaving issues.