Pinned Drafting Apparatus
An intersecting pinned-faller drawing machine designed to attenuate and parallelize long bast fiber slivers forms the mechanical core of yarn preparation lines. This heavy drafting apparatus, universally identified as a gill box, controls long fiber flow by driving intermeshing combs through the moving sliver bed. Opposed sets of moving faller bars carry hardened steel pins that penetrate the fiber mass from above and below, restraining short fibers while front drafting rollers draw the longer strands forward.
The structural classification covers pinned intermediate drawing systems within long-staple flax and wool processing, excluding open unpinned roller drafting frames and standard cotton-system draw frames. Linen spinning mills in northern and eastern production zones log machine throughput using linear delivery counters mounted to the delivery coiler heads. Daily equipment maintenance dockets track pin straightness, faller bar guide wear and back-to-front draft ratios for each shift.
Faller Bed Kinematics
Revolving mechanical screws or linear track systems push rows of faller bars forward along the direction of sliver transit at an exact intermediate surface velocity. Inside the operational zone of the gill box, fibers entering through back feed rollers at slow feed speed are immediately penetrated by descending faller pins. These pins move faster than the feed rollers but substantially slower than the high-speed front delivery rollers, creating a stable mechanical web that suppresses the uncontrolled surge of floating fibers.
As each faller bar reaches the front delivery nip, it drops downward under cam action and returns to the rear via a lower tracking channel. Precision timing between the upper and lower screws ensures smooth drop-motion, preventing faller bar collision or pin jamming during continuous operation. Mill maintenance crews check the condition of faller ends, transfer cams and faller tracks weekly, recording wear tolerances with feeler gauges to maintain pin alignment.
Pin damage or worn screws cause bar bounce, which leaves visible periodic drafting waves along the processed flax sliver. Sliver slippage inside the gill zone alerts operators to worn rubber coatings on the top delivery press rollers, requiring immediate roller re-buffing on shop grinders.
Sliver Doubling Capacity
Multiple sliver ends feed simultaneously into the gill box creel to cancel input mass variations through doubling. Combining six or eight ends at the feed plate smooths out local density variations, while the pinned draft attenuates the combined bundle back to an optimal target linear density. Combed line flax typically undergoes three consecutive gilling operations to achieve uniform fiber orientation and sufficient bundle splitting before roving formation.
Mill inspection sheets record deliverable sliver CV values and meter weights after each drafting stage to verify machine draft stability. Mechanical gilling provides the structural parallelization necessary for drafting uniform wet spun flax rovings.