Textile Component
Loom preparation requires high-strength yarns that can withstand the intense tension of the weaving cycle. Flax warp yarn is a strong, spun thread made of long-staple flax fibres that run longitudinally in the loom. This yarn must possess high tensile strength, uniform twist, and low hairiness to prevent breakage during shedding and beat-up.
It is typically spun from selected high-grade scutched flax to ensure durability.
Tensile Demands
Spinning mills produce this yarn using wet-spinning techniques to align the fibres and activate the natural pectin for stronger bonding. The yarn undergoes warping, where hundreds of individual threads are wound parallel onto a warp beam under uniform tension. In linen weaving, the warp yarn faces severe mechanical friction from the reed, healds, and adjacent threads.
Any thick or thin places in the yarn can lead to failure when the loom reaches peak tension. Spinners must carefully monitor the yarn twist to balance strength and stiffness. Too much twist makes the yarn snarled and hard to weave, while too little twist results in poor tensile resistance.
Sizing Treatment
Sizing agents are applied to the yarn sheet during warp preparation to increase resistance to abrasion. This coating glues loose fibres to the yarn body, reducing friction inside the loom. Sizing ensures that the yarn runs smoothly through the drop wires and heald eyes.