Drawing Mechanics
Yarn production utilizing a constant feed of damp flax bundles through the drafting zone ensures high uniformity in fine linen spinning. This mechanical configuration, termed continuous wet roving, feeds the untwisted fibre strand directly through a hot-water trough before it reaches the drafting rollers. The water softens the natural pectins holding the flax fibres together, which allows them to slide past each other smoothly during drafting.
It enables the production of extremely fine, high-strength yarns that are otherwise impossible to spin from coarse dry flax. Modern frames automate this feed to prevent manual piecing of broken strands.
Moisture Application
Hot water application remains the defining parameter of this spinning method because it regulates the softening of the inter-fibre gums. If the water temperature falls below sixty degrees Celsius, the pectins do not soften sufficiently, which leads to thick and thin places in the drafted strand. Operators maintain the water level and temperature using automated sensor loops.
Output Characteristic
Finished yarn spun via this wet method possesses a smooth surface with minimal hairiness, making it highly suitable for high-speed warp insertion on modern looms. This surface quality reduces the need for heavy sizing before weaving. Flax spun this way dries quickly on the take-up bobbin to prevent mildew during storage.