Linear Density
Measurement of fluctuation in the mass per unit length of flax slivers during drawing and spinning defines yarn evenness. By applying capacitance mass variation, testing instruments pass the dry textile strand between two parallel metal plates of a capacitor to register changes in electrical capacitance. These electrical fluctuations correspond directly to changes in the volume and weight of the fiber assembly passing through the sensing zone.
This continuous analysis provides the basis for generating spectrograms that identify mechanical faults in the drafting rollers.
Spectrogram Analysis
Repetitive periodic defects in the drawn sliver or finished yarn appear as distinct peaks on the test results. These diagnostic charts help the spinning mill isolate worn bearings, eccentric rollers, or slipping drive belts by tracing the wavelength of the recorded mass variations. When the sliver shows high short-term variation, it leads to increased yarn breakage rates on the spinning frames.
Defect Categorization
Mass fluctuations are sorted into specific categories representing thin places, thick places, and naps based on their deviation from the average yarn diameter. The capacitance mass variation data establishes the grade of the finished linen yarn for subsequent weaving operations. Weavers select batches with low variability to prevent fabric defects.