Drafting Delay
Mechanical adjustment delay is the interval required for a drawing machine to correct measured sliver irregularities. In high-speed linen drawing, autoleveler response time governs the distance of uncorrected sliver that passes through the drafting zone before the rollers adjust. This duration determines the limit of sliver uniformity that can be achieved in a spinning mill.
Correction Dynamics
Operational efficiency in the drawing phase depends on how quickly the sensor communicates with the servo drive. In Chinese mills, the autoleveler response time is checked against the machine’s calibration log to ensure the correction coincides with the thick or thin spot. When the drafting speed increases, the physical length of the uncorrected defect grows, which can lead to yarn breakages in downstream spinning processes.
This mechanical lag is typically measured in milliseconds, and it represents a critical difference between old drawing frames and high-performance machinery.
Quality Benchmark
Verification of drawing performance involves evaluating the variation in sliver weight per unit length. Mill operators record these deviation values in the daily shift report, separating them from the buyer’s yarn acceptance criteria. A shorter autoleveler response time prevents the formation of long-term mass variations in the final yarn, ensuring a consistent strength profile during weaving.
Consistent tracking of this parameter reduces fabric rejection rates.