Production Defect
A collective category of textile defects originates during the loom-stage of fabric manufacture rather than during yarn spinning or finishing. Known as weaving shed faults, these irregularities are created by mechanical issues, incorrect loom settings, or environmental fluctuations within the production hall. This category governs defects such as broken picks, reed marks, and selvage damage that occur while the linen yarn is being woven.
It does not apply to blemishes introduced during subsequent dyeing, printing, or chemical finishing processes.
Environmental Cause
In modern mills, maintaining precise control over temperature and humidity is critical to preventing these woven issues. To reduce weaving shed faults, the mill must maintain the loom’s mechanical parts, including the tension bars and filling selectors, to ensure optimal performance. If the air becomes too dry, the stiff flax fibers become brittle and break under the high tension of rapid rapier movements.
Low humidity also increases static electricity, which causes adjacent warp yarns to cling together and disrupt the clean opening of the shed.
Industrial Impact
Minimizing these issues is necessary to maintain profitable export operations. When weaving shed faults are kept to a minimum, mills monitor the frequency of these occurrences to trigger maintenance schedules and adjust the climate systems of the weaving room. The final yield of first quality cloth increases, ensuring higher profits for the weaving facility.