Structural Definition
A filling defect in woven textiles occurs when a pick of weft yarn is missing across a portion of the fabric width. The occurrence of a drop pick arises when the filling yarn is not caught or inserted correctly by the loom mechanism for a fraction of the shed opening. In linen weaving, where the flax yarn lacks the elasticity of cotton, such an interruption often causes a distinct gap before the mechanism resets.
This specific defect is restricted to single yarn insertions and does not cover cases where multiple consecutive picks are missing.
Mechanical Origin
Weft insertion systems on modern rapier or projectile looms require precise timing of the yarn grip to prevent mispicks. If the tension of the linen yarn drops or if the accumulator fails to deliver the yarn smoothly, the gripper may fail to retain the yarn during its passage, causing a drop pick. This mechanical fault results in the loom operating without inserting the full width of yarn, leaving a blank space.
Grading Influence
Fabric inspection protocols assess the severity of these errors to determine the commercial value of the finished linen roll. A single drop pick is typically classified as a minor defect, adding penalty points depending on its length. Export contracts specify the maximum allowable frequency of these defects before a roll is rejected.