Protective Shell
A continuous dry layer of protective sizing agent encapsulates outer fiber bundles on warp yarn to withstand mechanical stresses during weaving. In linen manufacturing, a size film forms as water evaporates from the applied aqueous starch or synthetic resin blend inside drying cylinders. This protective coating coats loose fiber ends, raising tensile strength while reducing hairiness and friction against heald eyes and reed wires.
The structural integrity of the coating breaks down under relative humidity levels exceeding eighty-five percent, where moisture absorption softens the polymer matrix and causes sticky yarn surfaces.
Abrasion Capacity
Mechanical endurance of sized flax yarns depends on film elasticity and substrate adhesion. Laboratory evaluation uses specialized abrasion testers that rub protected yarns against metallic pins under controlled tension until failure occurs. Results show that uniform film encapsulation extends yarn abrasion resistance by up to three hundred percent compared to unsized flax strands.
Scanning electron microscopy reveals whether size remains on the surface or penetrates into internal fiber voids.
Finishing Specification
Verification of sizing quality appears on warp preparation dockets prior to loom mounting. Quality inspectors verify size film continuity by measuring surface hairiness metrics on optical testing sensors. Compliance certificates validate that the protective coating can be completely scoured out during finishing operations without damaging flax fibers.