Braking Mechanism
Tensioning assemblies on winding frames prevent yarn overrun and slackness during machine stops. This is controlled by a pneumatic creel brake, which applies consistent frictional resistance to the yarn supply packages on the creel. Located at the package holders of the warping creel, this brake operates during emergency stops to keep the yarn sheets under control.
It is recorded on the warping machine specification sheet as a mechanical parameter for each yarn lot.
Pneumatic Control
Compressed air is supplied to a central manifold that distributes pressure to each spindle on the creel. In a pneumatic creel brake, the air pressure forces a brake pad against the rotating package holder. This action halts the rotation of all packages simultaneously, matching the deceleration of the main warping drum.
Quality Impact
Uniform warp tension is critical for Chinese linen mills preparing yarn for export to European markets. If the pneumatic creel brake fails or applies uneven pressure, some yarn packages will spin freely and create loose loops. These slack yarns cause crossed ends and snarls when the machine restarts, which can ruin a yarn lot or cause run defects on the loom.
The mill standard requires a complete stop within two seconds from full speed to ensure warp uniformity and prevent defects.