Deformation Metric
Yarn performance metrics describe the ability of a linen yarn to return to its original length after undergoing tensile stress during fabric construction. The retained strain percentage represents the residual elongation that persists after the yarn is stretched and released. Measured during tensile testing of spun yarns, this value is recorded in the laboratory test report to assess the yarn’s dimensional stability.
High values indicate that the linen yarn will deform permanently under loom tension rather than recover.
Testing Procedure
Tensile testers stretch a yarn specimen to a pre-defined limit and then allow it to return to zero tension. The retained strain percentage is calculated by dividing the unrecovered elongation by the initial extension.
Loom Performance
Buyers of high-grade linen fabrics utilize this parameter to evaluate the yarn’s suitability for high-speed projectile or rapier looms. A low retained strain percentage ensures that the yarn can withstand the repeated picking action without losing its tension or becoming loose. When the value is too high, the warp yarns will sag on the loom, causing mispicks and uneven fabric density.
The buyer’s acceptance criteria typically require this metric to stay below three percent to guarantee consistent fabric width and density after finishing.