Chemical Refining
Hot alkaline treatment of flax fibers removes pectin and hemicellulose to expose the pure cellulose structure before spinning. This process, known as non-cellulosic dissolution, is essential for transforming stiff bast fiber into pliable yarn. Removing these binding compounds increases the fiber separation and permits the production of finer yarn counts.
Spinning Mechanism
During the wet spinning process, the action of hot water or alkaline solvent softens the pectinous gums holding the elementary fibers together. This non-cellulosic dissolution allows the individual fibers to slide past one another under the drafting rollers. If the gums remain intact, the sliver cannot be drawn thin enough to form high-quality fine yarns.
The rate of this material removal determines the ultimate softness and tensile strength of the spun linen.
Process Calibration
Temperature and chemical concentration are the primary variables controlling the rate of material removal in the roving bath. Standard industrial operations run the bath between sixty and seventy degrees Celsius to achieve the desired reaction speed without damaging the fiber. A lower temperature results in insufficient softening, which causes draft cuts and thick-and-thin sections in the yarn.
Conversely, excessive temperature speeds up the reaction too much and removes the internal cell-wall binders, which weakens the fiber structure and increases spinning breakages. Processing facilities use laboratory titration to measure the alkali strength and maintain a consistent dissolution rate throughout the production run.