Insertion Control
The control of force applied to the yarn inserted across the width of a loom determines the tightness of the weave. This mechanical parameter is known as filling yarn tension, and it governs the spacing of the weft threads in linen fabrics. It applies directly during the insertion phase of the weaving process.
The control stops once the reed beats the yarn into the fell of the cloth.
Weft Behavior
Proper regulation of the insertion force prevents yarn breakage and fabric distortion. If the filling yarn tension is too high, the edges of the linen cloth will pull inward and create uneven fabric width. Conversely, low tension causes loops and loose threads to form on the surface of the woven material.
The loom operator monitors this force using electronic tension meters attached to the pre feeder units. Adjustments are made by varying the braking force on the yarn delivery disk. A digital controller keeps the tension within five percent of the target value during the entire production run to maintain consistent fabric density.
Fabric Uniformity
Different loom types require specific tension profiles to handle linen’s low elasticity. Uncontrolled filling yarn tension leads to high defect rates and rejection during final inspection. The quality manager logs these tension levels on the daily loom report to track machine performance.
These records help determine the maintenance schedule for the yarn tensioners.