Void Fraction
Structural space within non-consolidated filament matrices is defined by the volume fraction of voids relative to total bulk volume. In liquid composite moulding and yarn wet processing, fiber bed porosity determines fluid storage capacity and flow paths through flax reinforcement mats. Physical testing procedures measure matrix volume before and after liquid saturation to compute void ratios.
The calculation ceases to hold when resin curing or severe mechanical crushing permanently collapses inter-filament void structures.
Compaction Response
Mechanical compression reduces inter-yarn voids while preserving intra-yarn capillary channels. Laboratory compression frames measure void changes under increasing tool pressure, recording displacement curves on resin infusion specification sheets. Excessive tool force lowers void volume below target levels, impeding liquor flow during composite infusion.
Maintaining balanced void distribution prevents dry spot formation in resin transfer moulding of flax reinforced composites.
Permeability Correlation
Flow resistance increases sharply as open void volume diminishes within packed flax stricks. Chinese composite weaving plants monitor porosity levels during fabric preform assembly, ensuring that vacuum infusion rates meet resin gel time constraints. Lower void fractions restrict resin velocity, extending mould filling cycles beyond allowable process windows and causing incomplete wet-out of dense core bundles.
Technical quality logs record porosity values alongside fluid impregnation times to verify compliance with structural component buyer acceptance criteria. Preform porosity data directly links fabric architecture to infusion efficiency on production lines.