Fiber Separation
Industrial processing of flax requires the division of thick bundle structures into their individual constituent components to enable the spinning of fine linen yarns. Through elementary fiber splitting, the cohesive multicellular technical fibres are broken down into single cell structures that measure between ten and twenty micrometres in diameter. This critical transition determines the minimum yarn count that the spinning mill can successfully produce, and the degree of separation is recorded on the raw yarn specification sheet.
Physical and chemical treatments must be balanced to achieve this state without reducing the strength of the individual cells, which is essential for maintaining spinning efficiency.
Chemical Mechanism
Chemical action during wet spinning preparation weakens the hemicellulose and pectin layers that bind the single cells together. When elementary fiber splitting occurs, hot water or alkaline solutions dissolve these binding agents, allowing the fibres to slide past one another under the drafting rollers. This lubrication enables the production of fine, uniform yarns that are highly valued in the apparel market.
Insufficient chemical treatment leaves the bundles too thick, which causes unevenness in the woven cloth and generates frequent yarn breaks on the loom.
Structural Integrity
Excessive chemical treatment can degrade the cellulose of the cell walls themselves. If elementary fiber splitting proceeds too far, the loss of structural coherence causes the yarn to lose its tensile strength. This boundary is monitored through daily wet spinning trial sheets that track both the average fiber length and the breakdown of the spinning yield.
The process must stop before the individual cell lengths are shortened.