Stress Measurement
The measurement of a yarn’s resistance to sudden, high speed pulling forces simulates the conditions of modern high speed looms. This resistance is quantified as the dynamic tensile impulse, which assesses how the linen yarn performs during the rapid motion of the loom’s picking cycle. The metric governs the behavior of warp yarns under transient stress.
The evaluation is restricted to the brief interval of shed change where tension peaks.
Fracture Analysis
High speed projectile and rapier looms subject the filling yarn to extreme accelerations during insertion. Measuring the dynamic tensile impulse allows the laboratory to identify structural weak points that slow speed testing fails to detect. This dynamic test applies a series of rapid tension spikes to a moving yarn strand until failure occurs.
The spinning mill records the force required to break the thread at these elevated velocities on the yarn test certificate. A high impulse threshold ensures the yarn can withstand the high speed shuttle actions without snapping. The resulting data helps the weaver optimize loom settings and select the correct yarn grade for heavy fabrics.
Yarn Qualification
Fibre length distribution and twist levels determine the yarn’s ability to absorb sudden energy inputs. Low values of dynamic tensile impulse correlate with high rates of loom stops. The weave room manager uses this data to select yarn lots that are suitable for high speed automated production.
Any lot that falls below the accepted standard is redirected to slower shuttle looms.