Dynamic Tensile Load
Deformation velocity measures the rate of elongation applied to tensioned longitudinal threads during loom shedding and beat-up actions. In high-speed linen weaving, warp strain rate defines the speed at which flax warp yarns undergo cyclic stretching as the weaving reed pushes weft yarn into the fabric fell. The parameter governs warp yarn breakage rates on rapier and air-jet looms.
It excludes static tension applied during warp beaming.
Deformation Speed Impact
Cyclic elongation during shed opening subjects flax warp yarns to rapid tension spikes due to low elasticity of bast fibres. Flax exhibits low extension at break compared to cotton or synthetic yarns, making warp ends vulnerable to brittle fracture under rapid strain loading. High strain rates reduce the time available for stress relaxation within the cellulosic fibre structure, causing end breaks at harness eyes and reed dent lines.
Loom speed adjustments balance picks per minute against warp yarn dynamic modulus to keep peak strain rates within safe working limits. Tension sensors mounted on the back rest roller record dynamic load variations across shed cycles. Adjusting shed geometry and back rest timing softens strain peaks, preserving warp thread integrity during high-speed production runs.
Warp Break Limit
Strain rates exceeding five percent per second trigger elevated warp breakage rates on non-elastic flax yarns. Excessive peak strain causes permanent elongation and warp tension loss.