Processing Scrap
Discarded yarn or fibre material generated when joining yarn ends during the winding and spinning processes must be managed to monitor material efficiency. This splice waste consists of the trimmed ends of flax yarns that are cut off during the mechanical or pneumatic splicing of broken yarn pieces. Minimizing this scrap helps lower the total cost of yarn production and reduces material loss.
Splicing Action
High-speed winding machines use automatic splicers to join yarn ends together with a blast of compressed air that interlaces the fibres rather than tying a knot. Before the blast occurs, the machine trims the tail ends of both yarn segments to ensure a smooth joint of consistent thickness. These trimmed tails fall into a suction tube and are collected in a waste chamber for disposal or recycling.
Proper calibration of the trimming blades ensures that the joint is secure while keeping the trimmed scrap to a minimum.
Recyclability Option
The collected yarn scraps cannot be spun into high-grade linen yarn due to their short fibre length. Instead, they are processed into non-woven materials, paper, or coarse industrial padding. This recycling process ensures that the byproduct of the splicing phase does not end up as waste in landfills.