Solids Concentration
Optical measurements determine the mass percentage of starch additives present in aqueous solutions during the warp sizing process. The sizing refractometer brix value provides a precise reading of dissolved solutes when light passes through the starch mixture used to coat flax yarns. A sensor measures the refractive index of the liquid and correlates that index to the known percentage of total dissolved solids in the fluid.
High density readings signal a potential overdose of sizing material while low readings identify insufficient pickup by the yarn during transit through the immersion box.
Equipment Calibration
Technicians perform daily verification of the electronic sensors against distilled water to establish a zero baseline for the instrument. Calibration procedures ensure that the sizing refractometer brix hardware remains stable despite fluctuations in ambient heat or mechanical vibrations near the production line. Regular maintenance involves cleaning the prism surface to prevent the buildup of starch films that distort light paths and corrupt output data.
Precision during this phase determines the accuracy of the entire subsequent sizing operation.
Process Integration
Textile engineers utilize real time data to adjust the concentration of the sizing bath while flax yarns move through the sizing machine at high speeds. Fluctuations in the moisture content of incoming fibres often require immediate modifications to the starch ratio to maintain standard wet pickup rates. The sizing refractometer brix provides the objective data necessary for an automated dosing pump to add either water or concentrated starch slurry to the tank without manual intervention.
Precise control over this variable prevents yarn breakage during weaving and ensures that finished linen cloth meets the required hand and finish specifications.