Fibre Specification
The mass per unit length of a continuous strand of flax fibres defines raw sliver linear density. This metric establishes the baseline thickness of the material before it undergoes drafting in a spinning frame. Mills quantify this property by weighing a known length of the sliver, typically measured in kilotex or grams per meter.
Deviations from target values indicate uneven fibre distribution or issues with the carding process. Precise control at this stage prevents variations in final yarn count.
Process Control
Operators monitor raw sliver linear density to ensure consistency across the entire supply batch. Testing occurs at the delivery end of the carding machine where fibres align into a cohesive, untwisted rope. Technicians sample segments from the beginning, middle, and end of the production lot to identify drift in output mass.
High values suggest the need for adjustment in the feed rate or a reduction in the doubling of ends. Low values trigger a check of the intake hoppers or a correction in the cylinder speeds. Stable mass distribution across the carding line improves the efficiency of subsequent combing and drawing stages.
Quality Assurance
Acceptable ranges for raw sliver linear density appear in the technical data sheet signed between the flax supplier and the spinning mill. Buyers verify these figures through independent lab analysis to confirm compliance with the agreed fibre grade. Specifications for this property rely on the moisture regain of the material, requiring a standard atmospheric condition for accurate weighing.
Discrepancies between measured and specified density lead to immediate re-evaluation of the blending process to avoid downstream defects in yarn regularity. Consistency in this physical attribute allows for predictable performance in high speed spinning environments.