Dust Collection
Suction equipment removes airborne flax fly and fibrous debris from the warp shed area during high-speed loom operation. Integrated pneumatic shed extraction channels vacuum airflow across the reed and heddle eyes to prevent dust accumulation. Weave room environmental management logs record hood suction pressure and filtration volume hourly.
Clean weaving zones reduce warp end breakage caused by entangling fiber clumps.
Airflow Mechanism
Linen yarns generate significant short-fiber dust during shed opening due to high yarn-to-yarn friction and stiff flax ultimates. Vacuum nozzles positioned above and below the warp line maintain capture velocities between fifteen and twenty meters per second. Continuous negative pressure draws loose lint into main ductwork leading to centralized drum filters and dust compactors.
Effective pneumatic shed extraction prevents fiber fly from settling back onto open warp yarns, where embedded slubs cause filling stops or fabric defects. Air velocity sensors detect duct blockages, triggering automated filter back-flushing to maintain steady static pressure. Collected waste fibers pass into waste recovery systems for non-woven padding production or briquetting.
Maintaining clean harness zones extends heddle wire service life and minimizes warp friction marks.
Operational Requirement
Environmental safety regulations mandate continuous extraction to keep airborne particulate levels below maximum allowable workplace exposure limits. Failure of extraction units requires immediate loom shutdown to avoid cloth contamination.