Thermal Drying
Thermal drying parameters govern the moisture content of cooked starch films applied to linen warp yarns on sizing machines. The state of starch desiccation describes excessive moisture removal from the applied sizing paste during cylinder drying or hot-air baking. Sizing room process sheets record cylinder temperatures and final warp moisture regain.
Optimal sizing leaves sufficient residual moisture to maintain film elasticity during weaving.
Brittle Behavior
Native and modified starches require moisture retention to preserve mechanical flexibility in the protective film encapsulating warp yarns. When drying cylinder temperatures exceed target levels or machine speeds drop unexpectedly, starch desiccation occurs within the sizing box drying zone. Over-dried starch turns brittle and loses adhesive bond strength with surface flax fibers.
During subsequent weaving, the flexing of warp threads over harness eyes causes the embrittled starch film to flake off as micro-powders. Loss of protective sizing exposes raw flax fibers to direct metal-on-yarn friction, causing fuzz formation and high warp break rates on the loom. Sizing technicians control steam pressure in drying cylinders and monitor online microwave moisture sensors to prevent over-drying.
Controlled re-moistening roll systems apply water mist to restore required warp moisture levels prior to beam winding.
Moisture Threshold
Warp sizing standards require finished loom beams to retain eight to ten percent moisture regain. When starch desiccation lowers warp moisture below six percent, the beam lot is flagged for mandatory re-conditioning before weaving.