Count Variation
Physical yarn parameters measure changes in mass per unit length along continuous textile strands during spinning processes. A linear density shift records unexpected deviations in yarn count, measured in tex or metric count (Nm), caused by uneven fibre drafting on wet-spinning frames. Mill quality lab test sheets log these count variations across sample bobbins to verify batch consistency against buyer target specifications.
The parameter applies to untwisted slivers and spun yarns prior to weaving or knitting.
Spinning Mechanism
Flax fibres possess irregular natural lengths and surface friction characteristics that resist uniform drafting during wet spinning. When draft roller pressure fluctuates or temperature in the bath varies, a linear density shift occurs along the yarn strand, creating alternating thick and thin places. Capacitance-based yarn testing equipment scans moving yarn at high speeds to record mass deviations per meter.
Mill technicians adjust drafting roll settings and bath temperatures when test graphs reveal systemic count shifts exceeding five percent. Persistent density shifts reduce yarn strength and cause end breaks during high-speed warping.
Fabric Defect
Downstream weaving of yarn with uncorrected count variations produces visible horizontal banding or streaks across the fabric face. Inspection frames categorize these defects as thick-and-thin bars in finished linen cloth. Severe density variations result in fabric lot reclassification or price downgrade.