Fiber Recovery
Flax processing efficiency is measured by the proportion of clean, aligned long fibers recovered from raw scutched flax after the combing stage. This parameter, referred to as hackled sliver yield, is a primary financial and technical benchmark in linen spinning mills. A high proportion of long sliver relative to the initial raw material input indicates effective fiber extraction and minimal damage during combing.
Spinning mills use this measurement to assess both the quality of the incoming fiber shipments and the mechanical alignment of the processing equipment.
Quality Drivers
Raw fiber characteristics and the configuration of the hackling pins determine the volume of long fibers that survive the combing process. Dry or under-retted flax is brittle and breaks easily under the impact of the steel pins, which lowers the hackled sliver yield and increases the output of short tow fibers. Optimizing the humidity of the raw material before it enters the combing zone reduces fiber breakage.
The progression of pin density must be calibrated precisely to open the fiber bundles gradually rather than snapping them. Excessive moisture can cause fibers to cling together, leading to increased resistance and tearing when the combs pass through the material.
Industrial Measurement
Combing machines weigh the input scutched flax and the resulting sliver to calculate the percentage of recovery. This relationship is represented by a simple ratio of output mass to input mass. Standard industrial operations target a specific yield range depending on the raw fiber origin.
Low yields demand immediate readjustment of the pin speed or a review of the moisture conditioning step.