Fiber Grading
Flax fibre evaluation relies on length, fineness, and tenacity measurements gathered before spinning begins. Four-point inspection grading applies strictly to woven linen cloth emerging from the loom rather than raw stalks or loose strands. Mills utilize this defect scoring method to quantify surface flaws in grey goods and finished fabric rolls destined for export markets.
Inspectors penalize irregularities based on size, awarding one, two, three, or four penalty points depending on the length or square area of the defect. Defective lengths exceeding nine inches receive the maximum penalty per single occurrence. Total penalty points calculated per one hundred square yards determine whether a textile lot meets export standards.
Buyer Tolerance
Purchasing contracts establish maximum defect ceilings that separate acceptable commercial shipments from rejected yardage. Commercial agreements often stipulate forty penalty points per one hundred square yards as the upper limit for standard grade linen. Exceeding this threshold results in price reductions or complete order cancellation depending on the severity of the surface flaws.
Mills operate under internal quality thresholds that remain stricter than buyer agreements to catch loom malfunctions early and prevent downstream disputes. Fabric grading distinguishes finished linen performance from raw material classification by measuring visible surface defects rather than intrinsic botanical properties.
Export Compliance
Commercial shipments require formal inspection certificates detailing defect densities before goods leave the production facility. Shipping documentation records the total square yardage examined alongside accumulated penalty counts to satisfy international trade requirements. Independent inspection agencies verify mill grading accuracy prior to port departure to validate commercial declarations.
Regulatory bodies in destination markets enforce strict conformity with stated grading metrics to protect downstream apparel manufacturers from unexpected material losses. Final settlement values depend entirely on certified inspection records generated at the exit of the finishing line.