Chemical Composition
Soxhlet solvent extraction determines the percentage of non-cellulosic lipids and waxes present on flax fibers prior to wet processing. Quantitative analysis of fiber extractables establishes the chemical purity of raw flax rove before hot water drafting and yarn boiling operations. Analytical laboratory test certificates state solvent-extractable content as a percentage of bone-dry fiber mass.
Natural waxes protect the growing flax plant but hinder chemical dye penetration if retained in excessive quantities. Standard test procedures employ petroleum ether or dichloromethane to dissolve organic surface components.
Removal Rate
Hot water baths on wet spinning frames soften low-melting plant waxes, allowing individual flax ultimates to slide past one another during drafting. High levels of fiber extractables create gum build-up on drafting rollers and fluted aprons, which causes drafting waves and periodic yarn irregularity. Alkaline boiling of rove or yarn saponifies fats and hydrolyses pectins, converting insoluble hydrophobic compounds into water-soluble sodium salts.
Scouring formulations incorporate chelating agents to prevent calcium pectate redeposition on yarn packages. Chemical laboratories monitor extractable levels after scouring to ensure full absorbency for subsequent bleaching or dyeing. Residual wax levels below zero point five percent allow uniform dyestuff exhaustion across the yarn lot.
Spinning Constraint
Excessive wax removal prior to spinning reduces inter-fiber cohesion and causes sliver drifting on roving frames. Yarn specifications mandate that fiber extractables remain between one point five and two point five percent on unspun rove.