Control Frequency
In-process quality control in spinning mills monitors the uniformity of the intermediate fibre strand before spinning. Through drawframe sliver sampling, technicians measure the weight per unit length of the flax strands to detect variations that could lead to thin or thick spots in the final yarn. This routine monitoring is scheduled at fixed intervals to maintain consistent yarn counts throughout the production run.
Technical Procedure
Operators extract specific lengths of flax sliver directly from the output of the drawing frames. In drawframe sliver sampling, these specimens are weighed on precision balances to calculate the coefficient of variation in sliver weight. Computerized systems analyze these measurements to detect drafting faults caused by worn rollers or incorrect roller settings.
This immediate analysis allows the maintenance crew to adjust the machine parameters before large volumes of defective sliver are produced. Correct roller alignment reduces the uneven forces applied to the flax fibers, which prevents premature drafting waves and sliver breakage.
Downstream Benefit
Consistent sliver density ensures smooth flow and minimal breakage during the subsequent spinning and twisting stages. When drawframe sliver sampling is omitted, yarn unevenness increases, which weakens the fabric produced on high-speed looms. Stable sliver quality directly reduces the rate of warp breaks in the weaving shed, raising overall mill efficiency.
Maintaining this control step is essential for producing high-tenacity linen yarns.