Visual Appearance
An unwanted lateral stripe across the width of a finished linen fabric arises from variations in yarn characteristics or tension during processing. These structural irregularities produce bare yarn barré bands when the fabric is dyed, appearing as continuous bands of different color depth or light reflection. They differ from temple marks because they recur at regular intervals.
Mechanical Cause
Variation in the draw-off speed during spinning or uneven winding tension on the yarn packages alters the physical properties of the linen weft. The resulting bare yarn barré bands show up when the loom receives a batch of yarn with inconsistent twist counts or different moisture content. Such differences affect how the weft takes up the dye.
In many mills, this defect traces back to irregular mechanical settings in the spinning frames that produce sections of yarn with higher density. Slippage in the winding drums or uneven bobbin build can also create cyclic tension bands that persist through the weaving phase.
Dyeing Behavior
Chemical absorption of the colorant changes dramatically when the fiber density or twist per inch is not uniform across the batch. While standard finishing processes mask minor surface irregularities, bare yarn barré bands resist standard evening treatments and remain visible in the final piece. This variation occurs because tight twist zones limit dye penetration into the flax fiber core.
Consequently, the fabric fails the final visual inspection.