Mechanical Resistance
Drafting tension describes the resistance generated by flax slivers as overlapping fibre bundles slide past one another between drafting rollers. In wet spinning operations for linen, attenuation force measures the mechanical drag required to draw down softened roving in a hot water bath prior to twist insertion. The measurement applies strictly to wet drawing zones where pectins are thermally plasticized.
It stops applying once twist binds the assembly into spun yarn.
Drafting Tension Control
Drafting mechanics depend directly on the temperature of the wet-spinning bath and the surface friction of the nip rollers. As roving passes through seventy-degree water, pectin binder softens, permitting individual flax ultimate fibres to slip along their longitudinal axes under roller traction. High drafting resistance indicates inadequate pectin softening or excessive fibre entanglement, causing the strand to break under tension.
Low resistance permits premature slip, generating thin places and irregular yarn diameter. Sensors mounted on the drafting frame record real-time torque on the front drafting roller to monitor drafting stability. Mill technicians adjust roller gauge spacing and bath liquor additives when monitored resistance strays from calibrated target bands.
Proper force balance maintains draft ratio stability across high-speed spinning frames.
Yarn Uniformity Limit
Excessive mechanical draft force ruptures individual flax elementary fibres instead of separating bundle strands. Slippage failure occurs when drafting force falls below liquid surface tension limits.