Solution Dynamics
Hot sodium hydroxide solutions remove natural pectin and hemicellulose from raw flax rovings during alkaline kier scouring inside Chinese wet processing mills. Heavy walled steel pressure vessels heat liquid baths to high temperatures under sustained pressure to swell stubborn non cellulosic plant matter without degrading adjacent cellulose chains. Caustic strength and liquor ratio govern dissolution rates across dense yarn packages loaded onto vertical spindles.
Hydroxyl ions penetrate tightly packed fibers while sequestered chelating agents bind iron impurities that would otherwise catalyze oxycellulose degradation during boiling cycles.
Removal Mechanics
Boiling alkali liquor breaks ester bonds linking lignin fragments to hemicellulose matrices within bast cell walls. Swelling pressures force swollen pectin gels outward into surrounding wash water where turbulent agitation strips away suspended residues before bleaching stages begin. Surfactant additions lower surface tension so caustic liquor reaches core filaments buried deep inside wound bobbins.
Temperature gradients across the vessel wall demand careful steam control to prevent localized overheating that causes uneven weight loss across parallel lots.
Acceptance Thresholds
Fabric inspectors verify complete gum removal by measuring residual ash content against mill production standards recorded on finishing route cards. Residual non cellulosic matter remaining above strict limits causes uneven dye uptake during subsequent pad batch dyeing runs. Laboratory technicians titration test spent liquor concentrations to confirm active alkali depletion stays within predictable parameters established for standard flax preparation lots.
Final evaluation relies on wettability drop tests where water absorption times under specific drop volumes prove whether boiling durations achieved required hydrophilic surface states for export grade linen fabrics.