Aerodynamic Separator
Dry mechanical separation systems categorize unspun flax tow particles based on their terminal velocity within an upward airstream. During fibre preparation, air classification splits coarse shive fragments from fine flax shives before carding. The process depends on aerodynamic drag rather than screen mesh geometry.
Dense woody residues drop against the air current while lighter fibre bundles move upward into collection cyclones. This stage operates after scutching to protect downstream card clothing from impact damage.
Cut Threshold
Drag force ratios determine the exact point where acceptable fibre bundles separate from discarded shive fractions. Adjusting duct air velocity alters particle retention without changing mechanical wire settings on the carding engine. Heavy woody shives fall out at low air speeds, while fine technical fibres remain entrained until reaching collection zones.
When operators vary duct fan speed, air classification shifts the minimum aerodynamic diameter of collected material, allowing precise control over shive contamination levels in raw flax sliver. Constant air velocity calibration prevents clean long fibre from passing into waste streams. Pressure transducers report resistance changes across the air path so operators can correct airflow drift immediately.
Yield Consequence
Mill intake records document raw fibre losses across initial cleaning stages. High residual shive content degrades yarn evenness and increases end breaks on spinning frames. Process balance requires regular duct maintenance to avoid static pressure drops.
Unintended air leaks alter internal duct velocity and shift the separation boundary, leading to inconsistent tow quality before wet spinning.