Chemical Processing
Softening the natural pectinous binders within the flax roving is accomplished by passing the strand through a hot aqueous bath immediately before drafting. This step, referred to as wet spinning dissolution, allows the bundles of elementary fibers to separate under mechanical tension. Precise control of the liquid temperature is necessary.
Drafting Mechanics
Drawing rollers on the wet spinning frame pull the softened roving to reduce its thickness and align the fibers. Without wet spinning dissolution, the fibers would remain bound in coarse bundles, causing yarn breakage or uneven thick places. The chemical softening enables the fibers to slide over each other gradually as they pass through the drafting zone.
This controlled movement is essential for achieving the high uniformity and low linear density characteristic of fine linen.
Spin Bath Regulation
Maintaining the water temperature between sixty and seventy-five degrees Celsius ensures the correct rate of binder softening. When the temperature falls below this range, incomplete wet spinning dissolution occurs, leading to drafting failures and coarse spots. Conversely, over-heating leads to excessive loss of the pectinous material, which weakens the resulting yarn during the spinning stage.
Automated temperature controllers are utilized to regulate the steam injection into the spinning trough, keeping the bath conditions stable. This stability is critical for producing yarn with consistent elongation properties across different production batches.