Physical Force
Physical forces quantify the resistance encountered when flax fibers are pulled apart in a wet spinning frame. This wet drafting resistance occurs because the water and heat used in the process soften the natural pectins that hold the fibers together. Measuring this force helps the spinner determine the correct settings for the rollers.
The value changes depending on the quality of the flax and the duration of the retting process.
Thermal Softening
Heat applied to the water in the spinning trough reduces the stickiness of the plant resins. When the temperature increases, the wet drafting resistance drops and allows the fibers to slide more freely. If the water is too cold, the fibers clump together and cause the yarn to break or become uneven.
Controlling the temperature is the primary way a mill manages the drafting behavior of the flax.
Spinning Stability
Consistent resistance values are required to produce a yarn with a high degree of uniformity. If the force fluctuates too much, the resulting thread will have weak points that may snap during the weaving process. Spinners monitor the tension on the frame to ensure it stays within the target range for the specific count being produced.
High resistance levels often indicate that the flax was not retted for a long enough period.