Tension Variation
Difference in tension across the width of a warp sheet from one selvage to the other or between different yarn layers on a warp beam can cause non-uniform fabric properties. This mechanical imbalance, called warp tension gradient, arises from poor alignment during the warping process or uneven pressure on the beam. In linen cloth construction, where flax yarns have very low elasticity, even minor variations in tension can lead to significant differences in yarn behavior.
The gradient is measured by taking tension readings at multiple points across the loom width.
Loom Mechanics
Uneven tension causes some yarns to be stretched more than others during the shed formation, increasing the risk of yarn breakages and uneven pick insertion. When a warp tension gradient is present, the tighter yarns are subjected to greater strain, which can lead to frequent broken ends and loom stoppages. The looser yarns may sag, causing poor shed clearance and weft insertion failures on high-speed air-jet looms.
Correcting this gradient requires precise adjustment of the tension bars and uniform winding of the warp beam.
Fabric Defect
Unbalanced tension across the loom results in wavy edges, uneven shrinkage, and structural distortion in the finished linen fabric. These defects make the fabric difficult to finish and can lead to uneven dye penetration because the stretched yarns absorb dye differently than the relaxed ones. This variation is a common cause of fabric rejection by garment manufacturers.