Quality Assessment
An observational quality control procedure involves examining finished textiles to identify, record, and categorize structural and aesthetic defects. Through visual fabric inspection, trained personnel analyze rolls of woven linen to verify that the material complies with commercial standards before shipment. This process governs the detection of faults like broken picks, slubs, and color shading across the roll under controlled lighting conditions.
It stops applying once the textile leaves the inspection frame and enters the cutting or sewing stage of apparel production.
Evaluation Process
Manual evaluation requires that the inspector monitors the fabric as it is drawn slowly over an angled glass screen, utilizing both transmitted and reflected light. Performing a visual fabric inspection requires an eye trained to distinguish natural linen slubs from unacceptable yarn defects. Every defect is marked with a plastic string or tag on the selvage, and its corresponding point value is recorded.
Consistency during this process is maintained by limiting the inspection speed to a maximum of fifteen meters per minute.
Operational Threshold
Yield calculations depend on these findings to determine the points per hundred square yards or meters. Once the visual fabric inspection is complete, rolls that exceed the allowed limit are flagged for secondary processing or downgraded to lower quality tiers. The final score is used to certify the shipment as export-ready.