Yarn Partition
Sizing machine assemblies divide the dense, wet sheet of sized warp yarns into individual strands before or after thermal drying to prevent adjacent ends from bonding into continuous mats. Located between the sizing box and the drying cylinders, or between the drying cylinders and the front headstock, a split section uses chrome-plated lease rods to separate sticky starch-coated flax yarns into distinct layers. Flax possesses abundant protruding surface hairs that become saturated with liquid size, gluing neighbouring strands together as they leave the size box.
The split section forces the dried warp sheet to traverse stationary or rotating lease rods, cleaving dried adhesive bridges cleanly before the sheet winds onto the loom beam. Without this separation, warp yarns tear violently when pulled apart by loom healds, causing yarn fuzzing and catastrophic warp breakage.
Lease Separation
Mechanical layout dictates the separation geometry, using multiple lease rods arranged in a stepped ladder sequence to minimize yarn deflection angles. Dry separation divides the total sheet into half, then quarters, and then eighths, using rods of decreasing diameter to ensure progressive, low-stress opening of bonded yarn ends. Flax warp yarns exhibit low tensile elongation and break easily if mechanical split angles become too steep.
Slasher operators monitor yarn tension throughout this dry splitting zone using load-cell rollers connected to digital drive regulators. Broken filaments and loose starch dust accumulate rapidly on the split section rods, requiring continuous suction cleaning or oscillating air jets to keep rod surfaces smooth. Slasher machine logs track lease rod replacement intervals, noting that grooved or scratched chrome rods slice delicate bast filaments and ruin weaving efficiency.
Weft Interface
Proper division of sized warp ends directly governs how cleanly the warp sheet separates inside weaving shed mechanisms. Inadequate separation within the split section creates paired ends that travel together onto the weaver beam, generating warp cross-overs that snag drop wires on rapier looms. Slasher operators set the splitting geometry based on yarn count and ends per centimetre, documenting rod configurations on the sizing process specification card.
Greige linen inspections register excessive yarn fuzziness when blunt lease rods shatter the hardened size film during separation, destroying surface smoothness. Proper splitting ensures that each flax end carries a uniform cylindrical size sheath, enhancing abrasion resistance against reed wires and neighbouring ends. High-density linen fabrics require flawless partition control to avoid yarn entanglement during shed opening.
The split section protects structural yarn integrity during the transition from wet sizing to dry beam winding.