Dimensional Change
Contraction of a yarn occurs when it is spun and subjected to moisture, heat, or tension release. This reduction in length, known as spinning shrinkage, represents the difference in length between the drafted fiber bundle and the final spun yarn. In wet spinning of flax, this dimensional change is highly dependent on the water temperature used in the trough.
The percentage of contraction must be factored into the calculations of yarn count. This change occurs as the wet fibers are twisted and dry under tension on the spinning bobbin. Accurate measurement of this shrinkage ensures that the mill achieves the targeted yarn linear density.
Physical Mechanism
Moisture softens the natural pectins in the flax fibers, allowing them to consolidate as twist is inserted. This consolidation results in spinning shrinkage as the fibers wrap around each other in a helical path. The tension of the traveler on the ring frame also influences the degree of contraction.
High tension partially counters this shrinkage during the winding process.
Fabric Property
Yarn stability affects the dimensional behavior of the woven fabric during washing and finishing. Excessive spinning shrinkage in the yarn can lead to high residual shrinkage in the finished linen fabric. Pre-shrinking treatment is applied to the yarn to stabilize its dimensions before it is loaded onto the loom.
Stable yarns yield woven linen with predictable wash performance.