Edge Irregularity
Warp yarns at the outer boundaries of a textile structure can experience excessive tension during the winding or insertion process. These selvage tight end defects occur when the edge warp yarns are stretched more than the body yarns, creating localized tension imbalances. This unevenness causes puckering along the fabric borders after relaxation.
Stress Concentration
Extreme tension on the outermost warp ends increases the likelihood of yarn failure and structural distortion during high-speed loom operation. In cases of selvage tight end defects, the continuous stress leads to warp breaks that force the loom to stop for repairs. The resulting fabric often displays wavy edges that do not lay flat, making it difficult to process during subsequent dyeing and finishing treatments.
This defect can also cause the fabric to tear during finishing when it is pulled through heavy rollers.
Tension Calibration
Loom technicians must balance the tension of the selvage yarns by adjusting the let-off mechanisms and warp beam brakes. Preventing selvage tight end defects involves using separate tension controls or coarser yarns for the borders to absorb the extra stress of the selvage construction. When these adjustments are made correctly, the selvage remains flat and matches the shrinkage of the main fabric body.
Mill inspectors examine the cloth edges during winding to ensure that tension is uniform from side to side. This preventative calibration avoids waste during garment cutting and finishing.