Membrane Separation Layer
Specialized multi-layer structures allow for the selective passage of water molecules while blocking dissolved salts and organic contaminants. In the water purification systems of textile mills, the polyamide thin-film composite is the active barrier used in reverse osmosis elements. This layer is extremely thin and is supported by a thicker porous polysulfone base.
The chemical structure of the polyamide allows for high rejection rates of the minerals found in the groundwater.
Permeate Flux Rate
Production of soft water for dyeing requires the membrane to maintain a consistent flow under varying pressure conditions. Because the polyamide thin-film composite is sensitive to temperature and salt concentration, the flux must be monitored to prevent the buildup of scale. The linen mill relies on this high quality permeate to ensure that dyes bond correctly with the cellulose without the interference of calcium or magnesium ions.
Variations in the feed water quality are managed by adjusting the high pressure pump speed. This consistency is necessary for the reproducibility of light shades on fine linen cloth.
Chemical Resistance Limit
Sensitivity to oxidizing agents represents the primary operational constraint for this membrane type. If the feed water contains residual chlorine from the pre-treatment stage, the polyamide thin-film composite undergoes irreversible degradation and loses its rejection capabilities. This damage occurs because the chlorine attacks the amide bonds in the polymer chain and creates holes in the separation layer.
Operators must use activated carbon filters or sodium bisulfite to neutralize all oxidants before they reach the membrane. Regular testing of the feed water for free chlorine is a standard requirement for the protection of the filtration system.