Fiber Adhesion
Natural pectins in flax plants bond individual fiber cells into strong, continuous bundles within the plant stem. The pectinous middle lamella acts as the glue that secures these fibers, and its decomposition is the goal of the retting process. Controlling its removal is crucial for separating the fibers without damaging their structural integrity.
Retting Interaction
During retting, microbial or chemical action breaks down this intercellular layer to release the spinnable fiber bundles. In linen mills, insufficient retting leaves the fiber bundles coarse and stiff, making it difficult to spin fine yarns. Conversely, excessive retting destroys the lamella completely, reducing the fibers to short, weak fragments that are difficult to process.
Spinners monitor the retting level closely to achieve the optimal balance between fiber fineness and yarn strength, as this directly affects the efficiency of downstream spinning operations.
Spinning Management
The remaining pectins in the yarn must be managed during wet spinning, where hot water softens them to allow the fibers to slide past each other. This softening is essential for drafting the yarn to the desired fineness. If the pectins are completely removed before spinning, the yarn loses its cohesiveness and breaks easily on the frame.