Absorption Factor
Mathematical values represent the relationship between the moisture content of a material and its oven-dry weight under standard atmospheric conditions. Determining the moisture regain coefficient for linen requires testing under standard humidity conditions because the value for flax is typically higher than for synthetic fibres. This figure allows mills to calculate the commercial weight of a shipment for invoicing and shipping.
Standardizing this value ensures that buyers and sellers agree on the quantity of actual fibre being traded regardless of humidity fluctuations.
Standardized Calculation
A laboratory determines the dry mass by heating a sample until all water is evaporated and then allows it to reach equilibrium in a controlled environment. The moisture regain coefficient is then derived by dividing the weight of the absorbed water by the weight of the dry sample. This ratio is expressed as a percentage, often set at twelve percent for linen in international trade agreements.
Without this agreement, the mass of a container could vary by several hundred kilograms depending on the weather during transit. The calculated figure is recorded on all commercial invoices and quality reports.
Process Influence
Control of humidity during the spinning process depends on these values to prevent the flax from becoming brittle or overly elastic. Adjusting the air conditioning based on the moisture regain coefficient keeps the yarn at the optimal strength for high-speed weaving. This stability reduces breakages on the loom and improves the overall efficiency of the textile mill.