Restorative Load
Downward pressure exerted by a helical spring on a Jacquard heald provides the necessary force to return the warp yarn to its neutral position after lifting. Lingo spring tension replaces the traditional deadweight system in modern high speed looms to minimize vibration and allow for faster cycle times. The specific Newton value of this force is matched to the yarn count and the density of the warp.
Shedding Precision
Proper adjustment of this force prevents the heald from bouncing at the bottom of the stroke. If the lingo spring tension is set too low, the shed does not clear properly and the pick may be trapped by sagging warp ends. Excessive tension increases the wear on the Jacquard hooks and leads to premature cord breakage.
Mill technicians use a hand held gauge to verify that every spring in the assembly provides a consistent resistance.
Fabric Uniformity
Constant resistance across the entire width of the loom ensures that the vertical travel of each warp thread is identical. Variations in lingo spring tension create a shaded effect in the cloth known as barre. Regular calibration of these springs is recorded in the loom setup sheet before every new warp beam is tied in.