Yarn Density
Measurement of yarn thickness in flax spinning expresses the length of spun thread produced per unit mass under standardised moisture regain conditions. A linear count defines the fine or coarse sizing of flax yarn, recorded in wet spinning mills as wet Lea or metric count Nm. Laboratory technicians determine this value by reeling yarn skeins of specified lengths and weighing them on calibrated analytical balances. Spinners adjust roving draft ratios according to target values specified on the yarn production order.
Spin Calibration
Variations in flax fibre diameter require continuous drafting adjustments during wet spinning to maintain constant yarn mass per unit length. Wet spinning frames pull the treated flax roving through hot water baths to soften pectins before drafting rollers apply draw ratios corresponding to the target linear count. Mill production sheets log count variations across spinning frames to detect spindle wear or roving weight fluctuations.
When yarn count drifts lighter than specified buyer tolerance, breaking strength drops sharply because fewer individual flax fibres remain in the yarn cross-section. Yarn inspectors measure count uniformity across reeled hanks to approve lots before spooling and winding.
Testing Boundary
Conditioning protocols ensure consistent mass readings during laboratory evaluation. A linear count does not quantify yarn hairiness or slub frequency remaining after yarn bleaching.